Place an order +375 17 355-58-40
Ru En

FABRICATION OF HIGH-PRESSURE HOSES AND TUBE CONNECTIONS

One of the priority areas of Parker Store activity is the fabrication of different hoses and tube connections with the use of ready-made Parker components. All the works are being performed only on the genuine high quality Parker equipment.

At our store you always can:

  • buy hoses with working pressure from 0.6 MPa to 42 MPa, from 1/4" to 3" in a diameter;
  • place an order for special hoses of ultrahigh pressure (up to 380 MPa), dielectric, chemically-inert and abrasion resistant hoses as well as hoses designed for works in low temperatures and etc.
  • buy protection guards for hoses – plastic, textile, spring ones.
  • buy hose fitting of different types – flange, DIN, BSP,SAE, ORFS, JIS.

If it is necessary our specialists will carry out pipes’ bending and expansion, pressing of cutting rings and equip them additionally with required fittings.

All Parker accessories have passed quality control and have appropriate certificates of quality.

EQUIPMENT FOR TUBE CONNECTIONS’ ASSEMBLY
EQUIPMENT FOR TUBE CONNECTIONS’ ASSEMBLY
HOSES SAMPLES
HOSES SAMPLES
CUTTING RINGS OF EO TYPE

CUTTING RINGS OF EO TYPE

CUTTING RINGS OF EO-2 TYPE

CUTTING RINGS OF EO-2 TYPE

CUTTING RINGS OF EO-2 FORM TYPE

CUTTING RINGS OF EO-2 FORM TYPE

Place an order ←Products and services
Сводная таблица наиболее распространенных обозначений рукавов
Number of sleeves Type of outer sleeve Editing of endings SAE DIN ISO EN
1 sleeve thin without removal of outer layer SAE100R1AT DIN 20022-1SN ISO 1436 1SN/R1AT EN 853 1SN
2 sleeves thin SAE100R2AT DIN 20022-2SN ISO 1436 2SN/R1AT EN 853 2SN
1 dense sleeve thin without removal of outer layer - - ISO 11 237 1SC EN 857 1SC
2 dense sleeves thin - - ISO 11 237 2SC EN 857 2SC
1 sleeve thick with removal of outer layer SAE100R1A DIN 20022-1ST ISO 1436 1ST/R1A EN 853 1ST
2 sleeve thick SAE100R2A DIN 20022-2ST ISO 1436 2ST/R2A EN 853 2ST
4 spiral sleeves standard With removal of outer and inner layer - DIN 20023-4SP ISO 3862 4SP EN 856 4SP
4 spiral sleeves standard With removal of outer and inner layer - DIN 20023-4SH ISO 3862 4SH EN 856 4SH
4-6 spiral  sleeves standard SAE100R13 - ISO 3862 R13 EN 856 R13

Quick search

EQUIPMENT FOR TUBE CONNECTIONS’ ASSEMBLY

HOSES SAMPLES

Place an order